Vertical deflection system
| No of divisions | 8 |
| No of pixels per division | 32 |
| Deflection factor range | 10mV/div to 5V/div in 1-2-5 sequence |
| Accuracy | +- 2% of current value + 1 pixel |
| Resolution | 8 bits (0,39%) |
| Frequency response (-3dB) | DC: 0-150 MHz, AC: 1.2 Hz-150 MHz |
| Step response rise time | max. 2.4 ns |
| Channel isolation | min. –60 dB |
| Resistance | 1 MOhm +5 %, -2 % |
| Input resistance inaccuracy adjustment | Digital for absolute accuracy +- 2% of current voltage + 1 pixel |
| Capacitance | 28 pF +- 2pF |
| Zero setting accuracy | +- 2% of the screen |
| Maximum input voltage | +- 200V at 100 kHz or less |
Triggering
| System type | Dual level |
| Trigger source for primary level | selectable Channel A, Channel B or external trigger input |
| Trigger source for secondary level | selectable Channel A, Channel B or external trigger input |
| Threshold setting | Channel A and Channel B on the whole display range. External fixed on about 1.5V |
| Slope selection | Leading or trailing edge independently on each source |
| Minimum trigger pulse period | 5 ns |
| Minimum trigger pulse length | 2.5 ns |
| Maximum voltage on external trigger input | –10V to +13V at 20 kHz or less |
| Adjustments | Digital filter with ability of setting the valid pulse length up to 131072*Ts for each level and counter of valid triggering events settable from 1 to 32768 for each level. HOLD-OFF settable up to 1048576*Ts with selectable AUTO mode, to sample proper amount of data before trigger. (Ts – actual real time sampling period) |
Data acquisition system
| No of divisions | 10 |
| No of pixels per division | 50 |
| Mode of operation | Sampling before and after trigger with continual selection of the trigger position |
| Record length | settable from 1024 to 1048576 (1M) samples for each channel |
| Time base range in 1:1 mode | 5 ns/d to 100 ms/d in 1-2-5 sequence |
| Time base range using different ZOOM modes | 625 ps/d to 204.8 s/d |
| Time base accuracy | 0.01 % to 100ns/d, 0.5 % for 50ns/d to 5 ns/d |
| Real time sampling frequency | 1kHz to 100 MHz |
| Equivalent sampling frequency | 1kHz to 10 GHz |
| Display range with respect to trigger event | 1048576 samples before and 1048576 samples after trig. event in length of 1048576 samples |
Probe compensation generator
| Output connector | BNC, together with External trigger input |
| Output impedance | 1 kOhm to parallel with 10nF and approx. 50 Ohm serial |
| Output waveform | Pulse with 1:1 duty cycle |
| Frequency | 1465 Hz |
| Output voltage (no load) | 3.3V +- 5% |
Power
| Power source | USB interface via USB cable (power ground isolated from ground of measuring inputs) |
| Max current | 470 mA |
Insulation specification
| Maximum working voltage | 500Vp while the voltage [V] * frequency [Hz] factor must not exceed 50000 [V Hz] |
| Resistance | > 2 GOhm |
| Capacitance | approx. 150pF |
Mechanical characteristics
| Dimensions without feet and connectors | 165 x 111 x 35 mm |
| Dimensions with feet and connectors | 182 x 111 x 39 mm |
| Weight | 550 g |